google28805837047e9b5c.html

google28805837047e9b5c.html

google28805837047e9b5c.html

google28805837047e9b5c.html

BMW

Automobiles
Large-scale production models
Series
The 1 Series was launched globally in Autumn 2004 and shares many structural, chassis, powertrain, hardware and electronic elements with the larger 3 Series. The model was started to provide a lower point of entry into the BMW range as the 3 Series moved gradually up-market. Initially launched as a 5-door hatchback, a 3-door version was also launched in July 2007. The 1 Series is priced between the MINI and the currentE90 3 Series. Because the coupe is the only rear wheel drives vehicle in its class, it is somewhat considered the successor to THE BMW 2002
The 1 Series coupe and convertible went on sale in the United States in model year 2008 as the 128i and the 135i. The convertible, unlike the 3 Series convertible, uses a soft-top instead of a folding hardtop. This is lighter, cheaper to manufacture and preserves more trunk space than the folding hardtop would allow. It offers luxury, with premium surround sound, 6-disc CD changer, satellite radio, an optional navigation system, and optional remote engine start.

3 Series
The BMW 3 Series is a compact executive car manufactured since model year 1975. The 3 Series is currently in its fifth generation, the E90 Current models include the sport sedan (E90), station wagon (E91), coupe (E92), and convertible (E93). It offers luxury, with an available navigation system. It has standard premium sound, and an optional navigation system.The 3 series is one of BMW's most important models, as it accounts for a majority of its worldwide sales.

5 Series
A mid size car execute For model year 2008, BMW has revised the 5 Series with a slightly redesigned interior, subtle exterior details, and new motor options.The M5 is the Motorsport division's version of the 5 Series. The new M5 (built on the E60 5 series chassis) is powered by a F1-inspired V10 engine, producing 507 hp (378 kW) and is mated with a 7-speed sequential manual gearbox (SMG) transmission, which is capable of a top speed of about 330 km/h (production variants are restricted to 250 km/h, or 155 mph). BMW has also recently added a 6-speed manual transmission for 2007 and newer models.

6 Series
The 6 Series is BMW's grand touring luxury sport coupe, based on the 5 Series' platform. Currently available as the 650i in coupe and convertible models in the U.S., the 6 Series returned in 2004 after a 15-year absence from BMW's model lineup.M6: A high performance version of the 6 Series. Developed by BMW's M Division, it is powered by the same 5.0 L V10 507 hp (378 kW) engine seen in the BMW M5. It is currently available in Russia, Europe, North America, South America, Australia and South Africa

X3

BMW's second crossover SUV debuted in 2004 (called SAV or Sports Activity Vehicle by BMW) and is based on the E46 3 Series platform. For 2007, the X3 is powered by the N52 inline 6 cylinder engine that debuted on the 2006 E90 3 Series. In 2007 a face lift was given to the X3, including an X-drive update, suspension adjustments, an engine upgrade, and aesthetics inside and out.
Marketed in Europe as an off-roader, it benefits from BMW's xDrive all-wheel drive system.

X5

The BMW X5 (E53) is a mid-size luxury SUV (SAV) sold by BMW since 2000. It features all-wheel drive and a line of straight-6 and V8 engines. For non-U.S. models there is a 3.0 L diesel engine.
The BMW E70 automobile platform replaced the BMW E53 as the X5's underpinnings in November 2006. The E70-based X5 SUV features many new technological advancements including BMW's iDrive system as standard equipment and, for the first time in a BMW, an optional third row seat.
The current generation incorporates safety innovations for the crossover segment, such as a unique rear framing section to protect 3rd row occupants from injury due to an impact.
The U.S. E70 features either a 3.0si(253 hp)or a 4.8i(350 hp) powertrain. In most parts of Europe, either a 3.0d(232 hp)or a 3.0sd(282 hp) powertrain is available. It has been announced that the X5 M will be released in 2008. It will feature the V12 engine from the 7 Series, which will provide the car with 432 hp (322 kW). The X5 M will feature a full body kit, new alloy wheels, and generally a revised look.

Honda
Honda Motor Company, Limited

The company manufactures automobiles, motorcycles, trucks, scooters, robots, jets and jet engines, ATV, water craft, electrical generators, marine engines, lawn and garden equipment, and aeronautical and other mobile technologies. Honda's line of luxury cars are branded Acura in North America, Hondura in the Honduras and Hongda in China. More recently they have ventured into mountain bikes.
Honda is the 6th largest automobile manufacturer in the world as well as the largest engine-maker in the world, producing more than 14 million internal combustion engines each year. As of August 2008, Honda surpassed Chrysler as the 4th largest automobile manufacturer in the United States. Currently, Honda is the second largest manufacturer in Japan behind Toyota and ahead of NISSAN.

Automobile

Honda entered Formula One as a constructor for the first time in the 1964 season at the German Grand Prix with Ronnie Bucknum at the wheel. 1965 saw the addition of Richie Ginther to the team, who scored Honda's first point at the Belgian Grand Prix, and Honda's first win at the Mexican Grand Prix. 1967 saw their next win at the Italian Grand Prix with John Surtees as their driver. In 1968, Jo Schlesser was killed in a Honda RA302 at the French Grand Prix. This racing tragedy, coupled with their commercial difficulties selling automobiles in the United States, prompted Honda to withdraw from all international motorsport that year.
After a learning year in 1965, Honda-powered Brabhams dominated the 1966 French Formula Two championship in the hands of Jack Brabham and Denny Hulme. As there was no European Championship that season, this was the top F2 championship that year. In the early 1980s Honda returned to F2, supplying engines to Ron Tauranac's Ralt team. Tauranac had designed the Brabham cars for their earlier involvement. They were again extremely successful. In a related exercise, John Judd's Engine Developments company produced a turbo "Brabham-Honda" engine for use in IndyCar racing. It won only one race, in 1988 for Bobby Rahal at Pocono.
Honda returned to Formula One in 1983, initially with another Formula Two partner, the Spirit team, before switching abruptly to Williams in 1984. In the late 1980s and early 1990s, Honda powered cars won six consecutive Formula One Constructors Championships. WilliamsF1 won the crown in 1986 and 1987. Honda switched allegiance again in 1988. New partners Team McLaren won the title in 1988, 1989, 1990 and 1991. Honda withdrew from Formula One at the end of 1992, although the related Mugen Honda company maintained a presence up to the end of 1999, winning four races with Ligier and Jordan Grand Prix.
Honda debuted in the CART IndyCar World Series as a works supplier in 1994. The engines were far from competitive at first, but after development, the company powered six consecutive drivers championships. In 2003, Honda transferred its effort to the rival IRL IndyCar Series. In 2004, Honda-powered cars overwhelmingly dominated the IndyCar Series, winning 14 of 16 IndyCar races, including the Indianapolis 500, and claimed the IndyCar Series Manufacturers' Championship, Drivers' Championship and Rookie of the Year titles. In 2006, Honda became the sole engine supplier for the IndyCar Series, including the Indianapolis 500. In the 2006 Indianapolis 500, for the first time in Indianapolis 500 history, the race was run without a single engine problem
During 1998, Honda considered returning to Formula One with their own team. The project was aborted after the death of its technical director, Harvey Postlethwaite. Honda instead came back as an official engine supplier to British American Racing (BAR) and Jordan Grand Prix. Honda bought a stake in the BAR team in 2004 before buying the team outright at the end of 2005, becoming a constructor for the first time since the 1960s. Honda won the 2006 Hungarian Grand Prix with driver Jenson Button.
It was announced on 5 December 2008 that Honda would be exiting Formula One with immediate effect due to the current economic crisis and are looking to sell the team

Electric vehicles Honda
Hybrid electric vehicles
Toyota and Honda have already said they've halved the incremental cost of electric hybrids and see cost parity in the future (even without incentives)
Honda Motor Company, Ltd. announced that it has three hybrid vehicles in the works, including a new small hybrid scheduled for introduction in early 2009. Since Honda discontinued its two-seat Insight hybrid in 2006, the company has been known to be planning a new dedicated hybrid vehicle, the new Honda Insight. According to Honda, the new vehicle will sell for less than the Prius and will be the most affordable hybrid to date and will be offered as a 5-passenger, 5-door hatchback. Honda expects to sell 200,000 of the vehicles each year, with half of those sales in the United State. The launch in the U.S. market is on April 2009
Honda is also planning to introduce a hybrid version of its Fit, as well as another unique small hybrid vehicle based on the CR-Z sports car concept that it introduced at the 2007 Tokyo Motor Show.

Hydrogen-powered fuel-cell vehicles
In, Japan, on June 16, 2008, Honda Motors produced the first assembly-line FCX Clarity. More efficient than a hybrid vehicle, the FCX Clarity combines hydrogen and oxygen from ordinary air to make electricity. The vehicle does not emit any polloution and its only byproducts are heat and water. The FCX Clarity also has an advantage over hybrids in that it does not require a rechargeable battery and the use of electricity. The lack of hydrogen filling stations throughout developed countries will keep production volumes low.

Fuel and propulsion technologies

Fuel and propulsion technologie

Most automobiles in use today are propelled by gasoline (also known as petrol) or diesel internal combustion engines, which are known to cause air pollution and are also blamed for contributing to climate change and global warming. Increasing costs of oil-based fuels, tightening environmental laws and restrictions on greenhouse gas emissions are propelling work on alternative power systems for automobiles. Efforts to improve or replace existing technologies include the development of hybrid vehicles, and electric and hydrogen vehicles which do not release pollution into the air.

Petroleum fuels

Diesel
Diesel-engined cars have long been popular in Europe with the first models being introduced in the 1930s by Mercedes Benz and Citroen. The main benefit of diesel engines is a 50% fuel burn efficiency compared with 27%in the best gasoline engines. A down-side of the Diesel engine is that better filters are required to reduce the presence in the exhaust gases of fine soot particulates called diesel particulate matter. Manufacturers are now starting to fit[diesel particulate filters filters to remove the soot. Many diesel-powered cars can run with little or no modifications on 100% biodiesel and combinations of other organic oils.

Gasoline

Gasoline engines have the advantage over diesel in being lighter and able to work at higher rotational speeds and they are the usual choice for fitting in high-performance sports cars. Continuous development of gasoline engines for over a hundred years has produced improvements in efficiency and reduced pollution. The carburetor was used on nearly all road car engines until the 1980s but it was long realised better control of the fuel/air mixture could be achieved with fuel injection. Indirect fuel injection was first used in aircraft engines from 1909, in racing car engines from the 1930s, and road cars from the late 1950s. Gasoline Direct Injection (GDI) is now starting to appear in production vehicles such as the 2007 (Mark II) BMW Mini. Exhaust gases are also cleaned up by fitting a catalytic converter into the exhaust system. Clean air legislation in many of the car industries most important markets has made both catalysts and fuel injection virtually universal fittings. Most modern gasoline engines also are capable of running with up to 15% ethanol mixed into the gasoline - older vehicles may have seals and hoses that can be harmed by ethanol. With a small amount of redesign, gasoline-powered vehicles can run on ethanol concentrations as high as 85%. 100% ethanol is used in some parts of the world (such as Brazil), but vehicles must be started on pure gasoline and switched over to ethanol once the engine is running. Most gasoline engined cars can also run on LPG with the addition of an LPG tank for fuel storage and carburettor modifications to add an LPG mixer. LPG produces fewer toxic emissions and is a popular fuel for fork-lift trucks that have to operate inside buildings.

Biofuels

Ethanol, other alcohol fuels (biobutanol) and biogasoline have widespread use an automotive fuel. Most alcohols have less energy per liter than gasoline and are usually blended with gasoline. Alcohols are used for a variety of reasons - to increase octane, to improve emissions, and as an alternative to petroleum based fuel, since they can be made from agricultural crops. Brazil's ethanol program provides about 20% of the nation's automotive fuel needs, as a result of the mandatory use of E25 blend of gasoline throughout the country, 3 million cars that operate on pure ethanol, and 6 million dual or flexible-fuel vehicles sold since 2003. that run on any mix of ethanol and gasoline. The commercial success of "flex" vehicles, as they are popularly known, have allowed sugarcane based ethanol fuel to achieve a 50% market share of the gasoline market by April 2008.

Electric

The first electric cars were built around 1832, well before internal combustion powered cars appeared. For a period of time electrics were considered superior due to the silent nature of electric motors compared to the very loud noise of the gasoline engine. This advantage was removed with Hiram Percy Maxim's invention of the muffler in 1897. Thereafter internal combustion powered cars had two critical advantages: 1) long range and 2) high specific energy (far lower weight of petrol fuel versus weight of batteries). The building of battery electric vehicles that could rival internal combustion models had to wait for the introduction of modern semiconductor controls and improved batteries. Because they can deliver a high torque at low revolutions electric cars do not require such a complex drive train and transmission as internal combustion powered cars. Some post-2000 electric car designs such as the Venturi Fétish are able to accelerate from 0-60 mph (96 km/h) in 4.0 seconds with a top speed around 130 mph (210 km/h). Others have a range of 250 miles (400 km) on the United States Environmental Protection Agency‎ (EPA) highway cycle requiring 3-1/2 hours to completely charge. Equivalent fuel efficiency to internal combustion is not well defined but some press reports give it at around 135 miles per US gallon (1.74 L/100 km; 162 mpg-).

Steam

Steam power, usually using an oil- or gas-heated boiler, was also in use until the 1930s but had the major disadvantage of being unable to power the car until boiler pressure was available (although the newer models could achieve this in well under a minute). It has the advantage of being able to produce very low emissions as the combustion process can be carefully controlled. Its disadvantages include poor heat efficiency and extensive requirements for electric auxiliaries

Air

A compressed air car is an alternative fuel car that uses a motor powered by compressed air. The car can be powered solely by air, or by air combined (as in a hybrid electric vehicle) with gasoline/diesel/ethanol or electric plant and regenerative braking. Instead of mixing fuel with air and burning it to drive pistons with hot expanding gases; compressed air cars use the expansion of compressed air to drive their pistons. Several prototypes are available already and scheduled for worldwide sale by the end of 2008. Companies releasing this type of car include Tata Motors and Motor Development International (MDI).
Rocket and jet cars
A rocket car holds the record in drag racing. However, the fastest of those cars are used to set the Land Speed Record, and are propelled by propulsive jets emitted from rocket, turbojet, or more recently and most successfully turbofan engines. The ThrustSSC car using two Rolls-Royce Spey turbofans with reheat was able to exceed the speed of sound at ground level in 1997.

Rocket and jet cars
A rocket car holds the record in drag racing. However, the fastest of those cars are used to set the Land Speed Record, and are propelled by propulsive jets emitted from rocket, turbojet, or more recently and most successfully turbofan engines. The ThrustSSC car using two Rolls-Royce Spey turbofans with reheat was able to exceed the speed of sound at ground level in 1997.

Future car technologies
Automobile propulsion technology under development include gasoline/electric and plug-in hybrids, battery electric vehicles, hydrogen cars, biofuels, and various alternative fuels.
Research into future alternative forms of power include the development of fuel cells, Homogeneous Charge Compression Ignition (HCCI), stirling engines, and even using the stored energy of compressed air or liquid nitrogen.New materials which may replace steel car bodies include duraluminum, fiberglass, carbon fiber, and carbon nanotubesTelematics technology is allowing more and more people to share cars, on a pay-as-you-go basis, through such schemes as City Car Club in the UK, Mobility in mainland Europe, and Zipcar in the US.

Production of Automobile

Ransom E. Olds.

The large-scale, production-line manufacturing of affordable automobiles was debuted by Ransom Olds at his Oldsmobile factory in 1902. This concept was greatly expanded by Henry Ford, beginning in 1914.As a result, Ford's cars came off the line in fifteen minute intervals, much faster than previous methods, increasing production by seven to one (requiring 12.5 man-hours before, 1 hour 33 minutes after), while using less manpower. It was so successful, paint became a bottleneck. Only Japan black would dry fast enough, forcing the company to drop the variety of colors available before 1914, until fast-drying Duco lacquer was developed in 1926. This is the source of Ford's apocryphal remark, "any color as long as it's black". In 1914, an assembly line worker could buy a Model T with four months' pay.


Portrait of Henry Ford (ca. 1919)

Ford's complex safety procedures—especially assigning each worker to a specific location instead of allowing them to roam about—dramatically reduced the rate of injury. The combination of high wages and high efficiency is called "Fordism," and was copied by most major industries. The efficiency gains from the assembly line also coincided with the economic rise of the United States. The assembly line forced workers to work at a certain pace with very repetitive motions which led to more output per worker while other countries were using less productive methods.
In the automotive industry, its success was dominating, and quickly spread worldwide seeing the founding of Ford France and Ford Britain in 1911, Ford Denmark 1923, Ford Germany 1925; in 1921, Citroen was the first native European manufacturer to adopt the production method. Soon, companies had to have assembly lines, or risk going broke; by 1930, 250 companies which did not, had disappeared.
Development of automotive technology was rapid, due in part to the hundreds of small manufacturers competing to gain the world's attention. Key developments included electric ignition and the electric self-starter (both by Charles Kettering, for the Cadillac Motor Company in 1910-1911), independent suspension, and four-wheel brakes.



Ford Model T, 1927, regarded as the first affordable American automobile.

Since the 1920s, nearly all cars have been mass-produced to meet market needs, so marketing plans often have heavily influenced automobile design. It was Alfred P. Sloan who established the idea of different makes of cars produced by one company, so buyers could "move up" as their fortunes improved.
Reflecting the rapid pace of change, makes shared parts with one another so larger production volume resulted in lower costs for each price range. For example, in the 1930s, LaSalles, sold by Cadillac, used cheaper mechanical parts made by Oldsmobile; in the 1950s, Chevrolet shared hood, doors, roof, and windows with Pontiac; by the 1990s, corporate drivetrains and shared platforms (with interchangeable brakes, suspension, and other parts) were common. Even so, only major makers could afford high costs, and even companies with decades of production, such as Apperson, Cole, Dorris, Haynes, or Premier, could not manage: of some two hundred American car makers in existence in 1920, only 43 survived in 1930, and with the Great Depression, by 1940, only 17 of those were left.
In Europe much the same would happen. Morris set up its production line at Cowley in 1924, and soon outsold Ford, while beginning in 1923 to follow Ford's practise of vertical integration, buying Hotchkiss (engines), Wrigley (gearboxes), and Osberton (radiators), for instance, as well as competitors, such as Wolseley: in 1925, Morris had 41% of total British car production. Most British small-car assemblers, from Abbey to Xtra had gone under. Citroen did the same in France, coming to cars in 1919; between them and other cheap cars in reply such as Renault's 10CV and Peugeot's 5CV, they produced 550,000 cars in 1925, and Mors, Hurtu, and others could not compete. Germany's first mass-manufactured car, the Opel 4PS Laubfrosch (Tree Frog), came off the line at Russelsheim in 1924, soon making Opel the top car builder in Germany, with 37.5% of the market.

Automobile

Automobile

An automobile or motor car is a wheeled motor vehicle for transporting passengers, which also carries its own engine or motor. Most definitions of the term specify that automobiles are designed to run primarily on roads, to have seating for one to eight people, to typically have four wheels, and to be constructed principally for the transprort of people rather than goods.However, the term automobile is far from precise, because there are many types of vehicles that do similar tasks.As of 2002, there were 590 million passenger cars worldwide (roughly one car per eleven people).

History

Although Nicolas-Joseph Cugnot is often credited with building the first self-propelled mechanical vehicle or automobile in about 1769 by adapting an existing horse-drawn vehicle, this claim is disputed by some, who doubt Cugnot's three-wheeler ever ran or was stable. Others claim Ferdinand Verbiest, a member of a Jesuit mission in China, built the first steam-powered vehicle around 1672 which was of small scale and designed as a toy for the Chinese Emperor that was unable to carry a driver or a passenger, but quite possibly, was the first working steam-powered vehicle ('auto-mobile'). What is not in doubt is that Richard Trevithick built and demonstrated his Puffing Devil road locomotive in 1801, believed by many to be the first demonstration of a steam-powered road vehicle although it was unable to maintain sufficient steam pressure for long periods, and would have been of little practical use.
In Russia, in the 1780s, Ivan Kulibin developed a human-pedalled, three-wheeled carriage with modern features such as a flywheel, brake, gear box, and bearings; however, it was not developed further.
François Isaac de Rivaz, a Swiss inventor, designed the first internal combustion engine, in 1806, which was fueled by a mixture of hydrogen and oxygen and used it to develop the world's first vehicle, albeit rudimentary, to be powered by such an engine. The design was not very successful, as was the case with others such as Samuel Brown, Samuel Morey, and Etienne Lenoir with his hippo mobile, who each produced vehicles (usually adapted carriages or carts) powered by clumsy internal combustion engines.
In November 1881 French inventor Gustavor Trouvé demonstrated a working three-wheeled automobile that was powered by electricity. This was at the International Exhibition of Electricity in Paris.
Although several other German engineers (including Gottlieb Daimler, Wilhelm Maybach, and Siegfried Marcus) were working on the problem at about the same time, Karl Benz generally is acknowledged as the inventor of the modern automobile. An automobile powered by his own four-stroke cycle gasoline engine was built in Mannheim, Germany by Karl Benz in 1885 and granted a patent in January of the following year under the auspices of his major company, Benz & Cie., which was founded in 1883. It was an integral design, without the adaptation of other existing components and including several new technological elements to create a new concept. This is what made it worthy of a patent. He began to sell his production vehicles in 1888.

Karl Benz

A photograph of the original Benz Patent Motorwagen, first built in 1885 and awarded the patent for the concept

In 1879 Benz was granted a patent for his first engine, which had been designed in 1878. Many of his other inventions made the use of the internal combustion engine feasible for powering a vehicle.
His first Motorwagen was built in 1885 and he was awarded the patent for its invention as of his application on January 29, 1886. Benz began promotion of the vehicle on July 3, 1886 and approximately 25 Benz vehicles were sold between 1888 and 1893, when his first four-wheeler was introduced along with a model intended for affordability. They also were powered with four-stroke engines of his own design. Emile Roger of France, already producing Benz engines under license, now added the Benz automobile to his line of products. Because France was more open to the early automobiles, initially more were built and sold in France through Roger than Benz sold in Germany.
In 1896, Benz designed and patented the first internal-combustion flat engine, called a boxermotor in German. During the last years of the nineteenth century, Benz was the largest automobile company in the world with 572 units produced in 1899 and because of its size, Benz & Cie., became a joint-stock company.
Daimler and Maybach founded Daimler Motoren Gesellschaft (Daimler Motor Company, DMG) in Cannstatt in 1890 and under the brand name, Daimler, sold their first automobile in 1892, which was a horse-drawn stagecoach built by another manufacturer, that they retrofitted with an engine of their design. By 1895 about 30 vehicles had been built by Daimler and Maybach, either at the Daimler works or in the Hotel Hermann, where they set up shop after falling out with their backers. Benz and the Maybach and Daimler team seem to have been unaware of each other's early work. They never worked together because by the time of the merger of the two companies, Daimler and Maybach were no longer part of DMG.
Daimler died in 1900 and later that year, Maybach designed an engine named Daimler-Mercedes, that was placed in a specially-ordered model built to specifications set by Emil Jellinek. This was a production of a small number of vehicles for Jellinek to race and market in his country. Two years later, in 1902, a new model DMG automobile was produced and the model was named Mercedes after the Maybach engine which generated 35 hp. Maybach quit DMG shortly thereafter and opened a business of his own. Rights to the Daimler brand name were sold to other manufacturers.
Karl Benz proposed co-operation between DMG and Benz & Cie. when economic conditions began to deteriorate in Germany following the First World War, but the directors of DMG refused to consider it initially. Negotiations between the two companies resumed several years later when these conditions worsened and, in 1924 they signed an Agreement of Mutual Interest, valid until the year 2000. Both enterprises standardized design, production, purchasing, and sales and they advertised or marketed their automobile models jointly—although keeping their respective brands.
On June 28, 1926, Benz & Cie. and DMG finally merged as the Daimler-Benz company, baptizing all of its automobiles Mercedes Benz as a brand honoring the most important model of the DMG automobiles, the Maybach design later referred to as the 1902 Mercedes-35hp, along with the Benz name. Karl Benz remained a member of the board of directors of Daimler-Benz until his death in 1929 and at times, his two sons participated in the management of the company as well.
In 1890, Emile Levassor and Armand Peugeot of France began producing vehicles with Daimler engines and so laid the foundation of the automobile industry in France.
The first design for an American automobile with a gasoline internal combustion engine was drawn in 1877 by George Selden of Rochester, New York, who applied for a patent for an automobile in 1879, but the patent application expired because the vehicle was never built and proved to work (a requirement for a patent). After a delay of sixteen years and a series of attachments to his application, on November 5, 1895, Selden was granted a United States patent (U.S. Patent 549,160 ) for a two-stroke automobile engine, which hindered, more than encouraged, development of automobiles in the United States. His patent was challenged by Henry Ford and others, and overturned in 1911.
In Britain there had been several attempts to build steam cars with varying degrees of success with Thomas Rickett even attempting a production run in 1860. Santler from Malvern is recognized by the Veteran Car Club of Great Britain as having made the first petrol-powered car in the country in 1894 followed by Frederick William Lanchester in 1895 but these were both one-offs. The first production vehicles in Great Britain came from the Daimler Motor Company, a company founded by Harry J. Lawson in 1896 after purchasing the right to use the name of the engines. Lawson's company made its first automobiles in 1897 and they bore the name Daimler.
In 1892, German engineer Rudolf Diesel was granted a patent for a "New Rational Combustion Engine". In 1897 he built the first Diesel Engine. Steam-, electric-, and gasoline-powered vehicles competed for decades, with gasoline internal combustion engines achieving dominance in the 1910s.
Although various pistonless rotary engine designs have attempted to compete with the conventional piston and crankshaft design, only Mazda's version of the Wankel engine has had more than very limited success.